SignX

 

Contents
Home
News
Products
Services
Photo Album
F.A.Q.
About Us
Contact Us

Site Search
Make a Service Call
How to Find Us
Product Tips
Job Opportunities



 

Magnetic Signs -- Care and Handling

Step 1
For car and truck applications, be sure the vehicle is clean and well waxed. Pretest the entire surface for magnetic adhesion. Magnetic signs will adhere to steel surfaces only. Body fillers, such as fiberglass, will decrease or eliminate holding power.

 

Step 1
Step 2
Be sure that both the surface where the magnetic vinyl is to be applied and the plain brown magnetic side are free from moisture, dirt, dust and other foreign particles.

 

Step 2
Step 3
Before applying, allow magnetic to warm to room temperature. The temperature of the metal surface is not a factor. Allow one edge of the magnetic sheet to contact the metal surface. The rest of the sheet will then adhere itself to the surface as you allow it to make contact.

If repositioning is required, remove the entire magnetic sign and reposition. Do not attempt to pull into place as this could scratch the metal surface and stretch the magnetic sign.

 

Step 3
Care & Maintenance
It is common for moisture to collect between the magnetic sign and the metallic surface. Remove the sign at least once a week and dry both the metallic surface and the magnetic sign. This is particularly important for cars and trucks. Failure to periodically clean and reposition the magnetic sign could result in damage to both the sign and the metallic surface.

 

Step 4

IMPORTANT NOTICE TO PURCHASER: All statements, technical information and recommendations herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCT. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer.


Home News Products Services Album F.A.Q. About Us Contact Us

Search

2003 Sign-X Company, Inc. All rights reserved.